ADVERTISEMENTS
Used Classic Lotus Cars models Lotus Mark II Parts 1
Picture Of Classic Lotus Cars
Classic Lotus Cars MK 2
Lotus Mark II Parts 1
Lotus Cars that came to be known as the Lotus Cars Mark II was created in 1949, while Colin Chapman was serving with the RAF. For his second car Chapman built on the knowledge gained from building and competing in the Lotus Cars Mark I, so he again used the widely available and inexpensive Austin 7 chassis as a starting point. He boxed in the chassis rails and replaced the cross members with stronger tubular braces. He swapped the Austin engine for a Ford engine and transmission, first from a Ford 8, then from a Ford 10, but retained the Austin 7 rear axle. To be able to use a wider tire, Chapman adapted Ford pressed steel wheels. He modified the engine as far as the club rules would allow.
Picture Of
Chapman used this chassis and running gear to support a cigar-shaped body with a rounded nose. It has rudimentary cycle-type fenders. The result was a very competitive Trials car, but also suitable for circuit racing. Chapman used the car to compete in events sponsored by the 750 Motor Club. Although Chapman built the car to compete in English Trials events, he also entered the car in track events, such as Silverstone, where he won in his class. From that point forward, Chapman would concentrate on designing and constructing cars for race circuits instead of trials Lotus Cars.
Ford Sidevalve Motor:
* Config: S4 SV
* Displacement: 1172 cc
* Bore/Stroke: 63.5 mm (2.5 in) x 92.456 mm (3.6 in)
Picture Of
Classic Lotus Cars
Ford Sidevalve Motor:
* Config: S4 SV
* Displacement: 1172 cc
* Bore/Stroke: 63.5 mm (2.5 in) x 92.456 mm (3.6 in)
Post Title → Used Classic Lotus Cars models Lotus Mark II Parts 1
ADVERTISEMENTS
